|
KEYWORDS: This Guide provides information and guidance for homeowners and renters on how
to clean up residential mold problems and how to prevent mold growth. Caution: try not to breathe in the spores of any mold that you grow. Leave bags or jars closed so the spores don't get loose in large numbers. You are normally exposed to mold spores in the air all of the time, but when they are grown for experiments, you have amplified the number of spores you are growing by much higher numbers than found in the environment.
Asthma & Mold, Mold Headache. Water contamination can have a negative affect on the health of you and your family. The effects may be immediate or long term. A USGS survey found that 70% of private wells were contaminated. EPA recommends that you test for a minimum of coliform bacteria, nitrate and lead, even if you have public water.
Skin Diseases, Stachybotrys Information, Mold Scientist, Mold & Landscaping,
, Mold Test Kit, Mold Testing Laboratory. Molds need a moist environment with moderate temperatures to grow.
. Molds produce tiny spores to reproduce. Mold spores waft through the indoor and outdoor air continually.
When mold spores land on a damp spot indoors, they may begin growing and digesting whatever they are growing on in order to survive.
There are molds that can grow on wood, paper, carpet, and foods. When excessive moisture or water accumulates indoors, mold growth
will often occur, particularly if the moisture problem remains undiscovered or un-addressed. There is no practical way to eliminate all
mold and mold spores in the indoor environment; the way to control indoor mold growth is to control moisture. Lift Tape Test, Physical Mold Samples, fungi Test Instructions, Mold Testing Instructions,
Chain of Custody, Mines, Gas Stations, Industrial Facilities, Old Cemeteries, Farm fields,
, Dumps, Improper disposal of paints, motor oils, etc. on private land. Recreational use of the public water supply.
Lead pipes in the home, Septic Systems, Acid Rain, Decaying Matter or other natural contamination.
water testing, drinking water, health, pregnancy, fitness, nutrition, drinking, water, testing, quality, analysis, water analysis, water quality, e. coli, bacteria, lead, ph, iron, pesticides, pcb, radon, arsenic, mtbe, nitrates, voc, oil, fuel, h. pylori, trichloroethylene, tce, coliform, healthguard, health guard, womens heath, child health, home health, health and fitness, epa, environmental, pollution, contamination.
Mold Test Interpretation, Clothes Mold, Car and Van Mold, Removal, Wallpaper Mold, Air Conditioning Mold,
Crawl Space Mold, Bathroom Mold. Molds can only be positively identified with a microscope. Bluish-green to green molds are usually Penicillium or Aspergillus. Black to brown-black molds can be Aspergillus niger, Alternaria alternata, Cladosporium herbarum, Cladosporium sphaerospermum, or Stachybotrys chartarum (a highly toxic mold). Reddish or pink molds are usually species of Fusarium.
Plumbing leaks, house plants, toxic, airborne molds, cooking steam, shower bath steam and leaks, wet clothes,
dirty HVAC systems. Find out where the air filters are for the building and sample at the beginning of the system, and then continue sampling at rooms further and further away from the air supply system. You can sample for mold spores which are mixed up in the dust that accumulates on the surfaces of air-duct grillwork.
|
